Premium led street light supplier: These are sodium vapor lamps that operate at internal pressure, usually above 1 atm, and temperature above 1000C. They contain xenon gas along with a sodium-mercury mixture enclosed in a ceramic tube. When an electric current is passed, the xenon gas ionizes to create an arc that heats the sodium mercury amalgam. The mercury vapors emit a bluish-white light, and the sodium vapors emit a golden-white light. These lamps offer higher efficacy and produce up to 150 lumens per watt of electricity consumed. They provide higher life spans, usually > 24,000 hours. However, it gives poor color rendering (distorts illuminated object color). They are typically used for street lighting and as advertising light on billboards, signs, parks, and monuments. See extra information at floodlights manufacturer.
LED: Semiconductors on a PCB or Board – The light-emitting part inside an LED roadway light is a semiconductor material. Silicon is an abundant material that manufacturers use to produce LED (Light Emitting Diode). There are various ways to manufacture an LED. Here are their descriptions: Wire Bond COB – Wire bonding connects an Individual LED or semiconductor to the substrate. Wire bond LED technology is simple to manufacture, as the integrated circuit is prepared to bond directly to the substrate. Multiple small LEDs are connected to the substrate or PCB, which are then covered by epoxy to seal and protect the electronic circuitry.
It seems that smart street lights are indeed amazing, with so many powerful functions. Speaking of this, many customers may still not understand how smart street lights realize these special functions. In fact, the key point of smart street lights is the light pole (see the above picture). The light pole part is larger than the ordinary street light pole, and the entire light pole is installed. Intelligent street lamp system. It can meet the public wireless Wi-Fi function, support the loading of public security cameras and public broadcast functions, and it can also have a built-in charging module to become a charging pile, support information release, and video surveillance light functions.
The fitness room uses 70 150W professional anti-glare LED lamps, which are directly replaced according to the original lighting method. The average illumination of the venue is above 300lx, and the uniformity is above 0.6, which exceeds the actual needs of customers. Compared with the original lighting scheme, the lighting quality of all venues has been comprehensively improved, the lighting is evenly distributed, there is no dark area, the vision is clear and bright, the performance of the lamps is stable, and the energy efficiency is higher, which not only ensures good lighting effects, but also meets the goals of energy saving and consumption reduction. . The new lighting environment will bring the school teachers and students a more invigorating sports enjoyment.
The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.
CHZ Lighting helps customers choose the most appropriate led lighting products and offer corresponding technical supports after understanding their overall needs. Customers only need to provide us with some basic engineering information. (Take led street light as an example, the information customers need to offer includes road width, pole height, pole position, pole spacing, average illumination requirement, etc.) Based on the provided information, our designers can then use Dialux simulate lighting effects and offer multiple design options to customers.
Flood lighting, also known as the LED spotlight and LED projection light, is controlled by built-in microchips. There are two types of chips, one is the combined power chip and the other is a single high-power chip. The former has a more stable performance, but the later has a large structure and can achieve very high power to offer long-distance and large-area illumination. LED flood light illuminates the surface higher than the surrounding. It is also known as the spotlight. Typically, the best LED flood light can be aimed in any direction and its structure is seldom affected by climates.
Features of CHZ outdoor LED street lighting: LED chip: Using PHILIPS chip, with high efficiency and long service life > 50000 hours. Driver: Using Meanwell or Inventronics driver, IP66 rated, high quality with improved performance. Power efficiency = 0.95. Color Temperature: LED street light provides a color temperature range of 3000, 4000, 5000, 5700, and 6500 Kelvin, excellent in improving the appearance of the building. Optics: Optical components reach IP66 protection standards. The LED optical system maximizes light to the target area for improved light uniformity. Read extra information on https://www.chz-lighting.com/.
The module LED street light source area is large, the light is uniform, and the illumination range is wide. Modular LED street lights can flexibly design the number of modules according to requirements, reasonably allocate the number and spacing of modules, and have a larger dispersion surface. Therefore, the light source area is relatively large and the light output is uniform. Module LED street light has good stability Module led street lights can be configured with high-quality driving power according to requirements, which will make the brightness, quality and stability of the entire lamp better.
Using aluminum provides lightweight, corrosion-resistant, versatile, heat-conductive, and recyclable designs for LED roadway light cases. A high-end LED roadway light will have a UV and water-resistive coating to improve longevity. The street light pole mount can be 60-76mm in diameter. The street light LED assembly must clamp onto the pole firmly. Manufacturers produce yoke, side entry, shoe, top entry, and suspended mounting mechanisms. These can be either aluminum or iron, depending on the design. In the case of iron, the mount can catch rust in high humidity and UV conditions. Aluminum is still the preferred mounting material for LED streetlights.