Detergent powder making machine factory today: All kinds of powder materials, liquid materials are weighed respectively according to the formula, sent to proportioning tank to make slurry, after hydrated aging, crushing and filtering by aging system, sent to top of spray tower by hi-pressure pump. Form mist particles through spray nozzles, dried by hot air generated by hot air furnace. At the bottom of the tower, hollow particles of detergent powder are formed. Then by air lifting, aging, base powder is made. Find additional information on https://www.cnzjmb.com/detergent-powder-production-line.html.
How Does Meibao Liquid Detergent Production Line Works?All kinds of materials are measured and put into the slurry tank in order according to the process sequence. The semi – finished liquid detergent is prepared by mixing, stirring and fully reacting in the slurry tank. Then, the semi-finished product is put into the static tank, where the material is cooled and settled, and the air bubbles in the material are removed to obtain the product with stable phase. The static tank is usually set at a height, and the finished product is transported to the filling line for packaging under the action of gravity. The finished products are packed in boxes and sent to the product warehouse for storage.
Calcium chloride is a white or off-white porous block, granular and powdery product. It has widely used in desiccant, dehydrating agent, refrigerant, building antifreeze, deicing agent and fabric fireproofing agent. The production methods of calcium chloride is hydrochloric acid and limestone method. The products are of good quality and widely used. Most of them are produced by by-product hydrochloric acid, mainly anhydrous calcium chloride.
Our products have been used in the production lines of many well-known manufacturers such as Unilever, Indonesia P.T.Wings Surya, Indonesia PT. Pacinesia Chemical Industry, Ittehad Chemicals Ltd(Pakistan), Singapore International Rubber Industry Co., LTD, US P&G, Germany Henkel, NICE Group, Guangzhou Liby Group and so on, and exported to Vietnam, India, Laos, Myanmar, Indonesia, Pakistan, Thailand, Tanzania, Ghana, Jamaica, Zambia, Dominica, Angola and other countries. Find even more information on cnzjmb.com.
The high-temperature gas purifying chamber is made of refractory material, and the high-temperature flue gas is subjected to secondary combustion in the purification chamber, and a small amount of dust entrained in the combustion process is polymerized and settled in the purification chamber. The hot air from the clean room at a temperature of about 800℃ is mixed with a certain amount of cold air, and the hot air mixed at the temperature required for the process enters the drying device to dry the product. The hot air temperature and heat supply can be adjusted according to the process requirements, and the continuous supply air temperature stability is ±10 °C. The burned slag is discharged from the other end of the burner to the slag discharge machine and transported away by the cart (or additional slag driving), so need high temp furnace generator, please consult MBZ.