Tensile testing machine wholesale by gesterinstruments.com? GESTER is professionally engaged in manufacture and R&D of Textile Testing Equipment with 20+ years experience, including Fabrics tests, Yarn& Fibre tests, Color fastness tests, Flammability tests etc. Various in styles, GESTER instruments’s textile testing equipment can meet the needs of different customers.GESTER insists on the use of high-quality materials and advanced technology to manufacture textile testing instruments. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.GESTER serves every customer with the standards of high efficiency, good quality, and rapid response. Discover more details on https://www.gesterinstruments.com/textile-testing-equipment.
With several modes of operation (spray, alternating light and dark, revolution), can simulate the real climate state. Individual timing of each sample clamp may enable different sample test in a same tester and facilitate test monitor and reduce operation cost. 7-inch color touch screen, various test monitor models(animation, figure and chart), simply operate, directly and clear. 1000 hours of continuous operations. Industrial grade microcontroller with strong antijamming capability. Xenon arc light fastness tester: 12 working positions monitoring, can set and inquire the irradiation energy. Possess fault prompt functions and self-diagnostic function.
Correct use of computerized universal testing machine: Make sure all wiring is correct before the tensile testing machine is operated and preheat for at least 15 minutes to package the stability of the sensor. According to the test, the position of the upper and lower limit blocks is reasonably set to prevent the instrument from running over the stroke and causing damage to the fixture and the sample. When pressing the fast up button or the fast down button, do not put your hand between the moving beam and the fixed specimen, fixture or test device to avoid injury.
The AC servo drive system with low noise and wide range of applications. Pneumatic Bursting Strength Tester Test Methods: Constant Time Bursting. The tester bring saving and printing functions and support on-line operation. Provide on-line interfaces, professional detection software which can be used to analysis testing result. Summary of Test Method: A specimen is clamped over an expandable diaphragm. The diaphragm is expanded by fluid pressure to the point of specimen rupture. The difference between the total pressure required to rupture the specimen and the pressure required to inflate the diaphragm is reported as the bursting strength.
Reagent Preparation: Prepare corresponding reagents according to different test standards and keep them as standby. If sodium perborate is required in the test, the preheating temperature shall not exceed 60℃ when preparing the solution, and it shall be used within 30 minutes at most to prevent the loss of oxidant. Solution Warm-up: Put the specified volume of solution and a specified number of steel balls into the stainless steel cup, put the stainless steel cup into the launderometer for a few minutes, preheat to the specified temperature. Then put in the prepared sample for test. Read even more details on https://www.gesterinstruments.com/.
ASTM D4060 tests abrasion resistance of organic coatings by the Taber abraser. This type of test method was introduced around the 1930s to perform accelerated wear testing. Its simplicity and effectiveness helped to make the device broadly adopted for a multitude of test protocols and specifications on a wide variety of products around the world. If you have any questions about the Taber Abrasion, contact us. Gester instruments offers Taber abraser testing to ASTM D4060 as part of the Surface Coatings testing services.