Ethylene bis-stearamide powder manufacturer and supplier by Sainuowax? The Sainuo plant was put into production in 2010, expanding from the initial one to the current three plants. At present, it has formed an international production of 30,000 tons of production capacity of polyethylene wax lubricating dispersant. The company has more than 100 employees, Upon technical support of professional polymer ,materials institutes of Qingdao University and Qingdao University of Science and Technology, and has a number of senior professional technical personnel and professional application laboratory, with strong independent R&D ability. Read additional info at https://www.sainuowax.com/nn-ethylene-bis-stearamide.html.
Oxidized polyethylene wax also known as OPE wax. It is an excellent new type of polar wax. OPE wax has special properties such as low viscosity, high softening point and good hardness. Oxidized polyethylene wax is an indispensable chemical material that can be used in wide range of industries and have various applications. It has no toxicity, good thermal stability, low volatility at high temperature, excellent dispersibility to fillers and pigments, excellent external lubricity and Strong internal lubrication, but also coupled.
Ethylene bis-stearamide is a hard and brittle white high melting point wax. Its industrial products are slightly yellow particles or white powder, non-toxic, and have no side effects on the human body. Substitute Malay and Indonesian products, partly substitute kao ES-FF products, low acid value, low amine value, high performance, high purity, excellent heat resistance and stability. If you are looking for professional & reliable ethylene bis stearamide suppliers, Sainuo will be your perfect choice. We have been focusing on nn ethylene bis stearamide for more than 15 years. Welcome to contact us for further details. Discover extra information on https://www.sainuowax.com/.
Colorants are the main components of color masterbatch. They provide all the required colors and characteristics. Inorganic pigments: black and white pigments represented by titanium dioxide and carbon black; Iron oxide, metal oxide mixed crystal series, ultramarine, metal sulfide, etc; Organic pigments: azo series, phthalocyanine series, heterocyclic (fused ring) series, etc; Organic dyes: solvent dyes, disperse dyes (part), vat dyes (part); Effect pigments: Mica (pearlescent) pigment, copper gold powder, aluminum silver powder (slurry).
Use of internal and external lubricants: The amount of lubricant added to a system should enable the material to obtain uniform plasticization and sufficient fluidity under normal operating conditions. If the adjusted amount of external lubricant still cannot meet the requirements of material processing, a small amount of internal lubricant can be considered. There are many factors affecting the external lubricant. When using high surface active fillers, such as ultrafine calcium carbonate and active calcium, the amount of external lubricant needs to be increased due to their absorption and adsorption to the lubricant. When using impact toughening modifier, the possibility of adhering to the metal surface is large due to the high melt viscosity, so it is often necessary to increase the amount of external lubricant.